Product Listing

Designed for laying out drawings in site offices.

View related products: click here

EDM reflectorless measuring with a narrow focused visible red laser.

The Builder R enables measurements of up to 250m with its electronic laser distance measuring system - thanks to the unique combination of focused visible red laser and flat prism. Together with an angle measurement, every point can be determined in reference to a line as well as in height with a single measurement - without having to reconfigure the Builder.

Leica Builder R comes complete with:

• Alkaline battery pack
• Black Tribrach
• Flat mini prism
• Mini prism pole set
• Rain cover
• Lens hood
• Tools for adjustment
• Manual
• Case

• Marking aerosol paints in stock

View related products: click here

Ridgid threaded rod cutters designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling.

• Makes clean cuts with out damaging thread
• No burr needs to be removed

• Cutting oils and lubricants in stock
• Saw blades and hole cutters in stock
• Full range of safety equipment available

View related products: click here

Used with a rotary drill will bore a hole up to 90mm. Comes with a water feed tank to keep the diamond core cool for a clean cut.

• Full range of diamond blades and cutting and grinding discs in stock.

View related products: click here

When it comes to cutting tiles in bulk, this bench top saw is hard to beat, producing clean, accurate results in tiles of all types and sizes.

• Makes square or bevelled cuts
• Accurate built-in rule and guide
• Fast cutting water cooled diamond wheel
• Electric with Diamond Blade
• Motor monophase 110v
• Power 2.2kw / 2.95hp
• Blade diameter 350mm
• Cutting depth 105mm
• Length of cut 620mm
• Weight 78kg

• Full range of diamond blades and cutting and grinding discs in stock.

View related products: click here

The fast, safe way of lifting machinery. Also used for lifting prefabricated buildings.

• 5 Ton

• Test certificates supplied on all lifting equipment

View related products: click here

Converts 240 Volt to 110 Volt for site application. MCB protection / lifting points.

View related products: click here

Converts 415 Volt to 110 Volt for site application. MCB protection / lifting points.

View related products: click here

3300 VA tool transformer with 1 x 32 amp 110V take-offs. Supply feed 240 volt.

View related products: click here

3300 VA tool transformer with 2 x 16 amp 110V take-offs. Supply feed 240 volt.

View related products: click here

Converts 240 Volt to 100 Volt. MCB protected.

View related products: click here

Converts 240 volt to 110 volt. For site application. MCB protection.

View related products: click here

Multivoltage totally re-defines what welding-machine mobility is all about. Because the TransPocket 1400 MV automatically switches over to the right mains voltage - whichever country you happen to be in.

And it does so steplessly for any voltage between 100 and 260 V. TIG attachment available.

• High power at a voltage of 100 - 260 V
• Thermostat-controlled fan
• Weighs only 4.5 kg and measures just 312 x 110 x 200 mm
• Sturdy, impactproof housing
• Anti-Stick device
• Automatic arc force
• ''Take anywhere'' for site-erection, repair and maintenance jobs
• Rod-electrode and TIG welding with contact ignition
• Suitable for construction sites and workshops
• Protection category IP23
• CE- S-marks
• Controls located in protective recess

• MOSA welding agents
• Full range of welding rods and accessories in stock

View related products: click here

• 3m (9.84ft) closed / 7.3m (23.95ft) extended
• 3.5m (11.48ft) closed / 8.5m (27.88ft) extended
• 4.3m (14ft) closed / 10.3m (33.79ft) extended
• 4.7m (15.41ft) closed / 12.0m (39.37ft) extended
• 5.5m (18ft) closed / 13.5m (44.29ft) extended

View related products: click here

Designed for garage use. The 2 ton jack is suitable for cars, and the 6 ton is suitable for commercial use, vehicles etc.

• 2 Ton and 6 Ton

• Test certificates supplied on all lifting equipment

View related products: click here

Designed for garage use. The 2 ton jack is suitable for cars, and the 6 ton is suitable for commercial use, vehicles etc.

• Test certificates supplied on all lifting equipment

View related products: click here

Complete gas equipment set. Suitable for oxyacytelene brazing, heating, cutting and welding.

• Full range of safety equipment available
• MOSA welding agents

View related products: click here