Product listing
Listed below are all products starting with "M".
Machinery Skate Caterpiller Skates
The ideal way of moving large machinery usually used in conjunction with toe jacks.
- 10 Ton and 24 Ton
- Test certificates supplied on all lifting equipment
View related products: click here
Makita Dry Cut Anti Spark TCT Saw
The LC1230 Makita Chop Saw is four times faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws. Powerful 1650w motor, D-shape handle for easy gripping. Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free.
- Lock-off button prevents accidental starting
- Tool-less guide plate adjusts 0-45 degrees for quick and easy mitre cutting
- Quick release vise for secure stock retention and fast repeated cut-offs
- Maximum cutting depth of 4½'' with carbide tipped blade
- Cutting oils and lubricants in stock
- Saw blades and hole cutters in stock
- Full range of safety equipment available
View related products: click here
Metal Shears
Upper/lower blades can be rotated 4 x 90 degrees for new sharp edge - Extends blade life.
- Steel deflector - For hand protection
- Slide switch - Positioned for extended running time
- Lightweight and well balanced - For excellent control
- Low vibration - For operator comfort
- Visible blade allows precise pattern cutting
- Full range of diamond blades and cutting and grinding discs in stock.
View related products: click here
MIG Welder
For strong smooth welds in such applications as steel fabrication, this mobile unit is the ideal solution.
- Single phase input 230V
- Synergic programmes stored for easy setting of condition electronically - can be upgraded - most common cureves already stored
- Can use standard, push pull or spool gun (only manual function with spool gun)
- Precise aluminium drive block for excellent wire delivery
- The 2020/M can use flux cored wire
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
Mobile Lighting Tower
The TL35 Halide mobile lighting tower has many useful features:
- 360° rotatable mast
- Electric winch
- Automatic mast locking device - simple, one-man operation
- PowerTilt Lamp control - vertical to horizontal lamp control at the touch of a button
- Fully bunded unit - no oil/diesel spills
- Supersilent - below 59dBA @ 7m
- 120 litre/80 hour run fuel tank
- Portable - trailer mounted
- Modern slimline light heads pivot in position for transit - quick stow - fast tow
View related products: click here
Mobile Man Anchor
The Mobile Man Anchor has been specifically designed to provide short term safety for low frequency operations where guardrails are not provided, such as flat roofs, roof level installations like AC units, telecommunication equipment etc.
- CE Approved
- The Mobile Man Anchor can be used on any flat roof or on industrial steel cladded pitched roofs up to 15 degrees pitch
- The Safesite Mobile Man Anchor can be installed as a complete restraint and fall arrest system
- Can be utilised on buildings over 4m high when used as a fall arrest system in conjunction with a shock absorbing rope grab device
- A series of Mobile Man Anchors can be linked at approx 10m centres using the standard Safesite Horizontal Line System components. This installation provides fall restraint for operatives whilst they travel between each Mobile Man Anchor and fall arrest once they have connected directly to an individual Mobile Man Anchor and disconnected from the horizontal line
The Mobile Man Anchor is extremely compact, portable, easily assembled and features a unique design incorporating a shock absorber which reduces the total weight of the unit, making the product more user friendly.
The Mobile Man Anchor has been designed to be used with an approved shock absorbing rope grab and rope and full body harness to provide safe access at all times.
The Anchor Weights are supplied with suction cut rubber boots to protect the roof membrane, increase frictional resistance and enable the anchor to be used on all roof membranes, even in wet weather.
The Unit has been designed to ensure compliance to the following Regulations:
- BS EN 795: Protection against falls from a height - Anchor devices - Requirements and testing.
- Work at Height Regulations 2005
- HS/G-33 Health and Safety in Roofwork 1998
- Construction ( Health, Safety and Welfare) Regulations 1996
- Construction ( Design and Management) Regulations 1994
- Workplace (Health, Safety and Welfare) Regulations 1992
- Manual Handling Operations Regulations 1992
View related products: click here
Mosa TS 200 amp DC BS/EL Petrol welding generator
Generating power for welding, lighting and power tools, this heavy duty, petrol engined welder/generator is an excellent choice for on site use.
- Full protection frame
- Lightweight and portable
- 200 A D.C. welding generator
- Honda GX 340 petrol engine with oil alert
- Capable of welding with 4mm electrodes
- Auxiliary power 4 KVA 230V plus 2 x 2 KVA 110V A.C.
- Electronic current control
- Boost start facility
- Brushless alternator
- Dimensions: 87 x 52 x 59 cm (without wheel kit)
- Weight: 115 kgs
- Optional remote available
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
Mosa TS 250 amp SXC/EL diesel welding generator
Super silenced 250A D.C. Welder / generator
- 20-250A D.C. steplessly adjustable welding current
- Twin cylinder Ruggerini diesel engine with auto shut-down
- Auxiliary power 7.5 KVA 415V plus 4 KVA 230V and 2 x 2.5 KVA
- 110V A.C. (available while welding)
- Complete with wheel kit
- Dimensions: 161 x 92 x 91 cm
- Weight: 360 kgs
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
Mosa TS 300 amp SXC/EL diesel welding generator
Super silenced 300A D.C. Welder / generator
- 20-300A D.C. steplessly adjustable welding current
- Ruggerini diesel with full engine protection
- Auxiliary power 10 KVA 415V plus 5 KVA 230V and 2 x 2.5 KVA 110V A.C. (available while welding)
- Complete with wheel kit
- Dimensions: 161 x 92 x 91 cm
- Weight: 390 kgs
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
Mosa TS 415 S/EL welding generator
1500 rpm VM 28HP diesel engine with protection.
- Welding current range 20-400A D.C.
- Auxiliary power 16 KVA 415V plus 12 KVA 230V and 6 KVA 110V A.C. (available while welding)
- Mounted for site towing
- Dimensions: 270 x 121 x 130 cm
- Weight: 930 kgs
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
Murex Industrial Transarc DC MMA Inverters
Offers excellent performance with all types of MMA electrode including difficult low hydrogen and cellulosic types, even for pipewelding applications. Constructed in rugged all metal caseworks the 300A unit using stainless steel to prevent rusting and corrosion. Very high efficiency designs provide high OCV (90V). The more powerful 303 requires only 16A fuses.
Both models are remote controllable with current and arc-force being remotely variable on the 300A unit, a common requirement for doing pipewelding on site.
- Superb MMA performance
- Precision current and arc-force controls, high 90V OCV
- High efficiency, small size and low weight
- DC303iE is fully offshorised for site uses, including fan filter and rustproof stainless casework
- Fully overload protected
- Remote control facilities, current and arc-force on DC303iE
- 400-440V 3 phase supplies
- Optional digital meter for DC303iE
- MOSA welding agents
- Full range of welding rods and accessories in stock
View related products: click here
